HB11A-XX Series Automatic Nozzles are engineered to meet the demands of today’s fuel dispensing environment. Compact, lightweight, and easy to handle, the HB11A combines user-friendly design with rugged durability. Built for long-lasting performance and dependable service, it has earned a global reputation as the most trusted conventional nozzle for full-service applications.

Ordering Specifications:

Key Features:
FlowLock™ System: Automatically shuts off if the nozzle falls or tips up, reducing spills and hazards.
Tested: Lasts over 1 million cycles – longer than other nozzles.
Spout Tip: Stainless steel – lasts 4x longer than aluminum tips.
Accu-Stop® Flow Control: Precise shutoff for to-the-penny fueling.
Color: Red, Green, Black, Blue, Silver, White, Yellow, Gold, etc. For option 

Yellow	Gold	Blue	Black	Red	Silver	Green

Replacement Parts of the HB11A Series of Fuel Nozzles are Available for Easy Maintenance

Key Part Name Description 1. Spout Available in: 13/16" and 15/16" sizes   2. Full Hand Insulator: Comfortable grip cover 3. Lever Assembly: Main handle for operation 4. Lever Guard: Protects the lever and the vehicle surface 5. Diaphragm Assembly: Controls internal pressure 6. Main Valve Assembly: Core valve for fuel flow control Compatible with models HB11A-60 and HB11A-45 Easy to replace Saves time and cost

All the key parts shown in the diagram of this fuel nozzle can be sold separately. This allows for quick and cost-effective maintenance without replacing the entire nozzle.

HBLEV-01 Nozzle Lever Material: Conductive Enhanced material of Plastic Size: To be used for HB11A-XX or HB11B-XX Usage: Opening fuel nozzle	HBC-01 Fuel Nozzle Hand Insulator Material: PVC Size: To be used for HB11A-45 or HB11A-60 type Fuel Nozzle  Color: Can be customized
HBSP01-B Nozzle Spout with Brass Umbrella Valve Pipe Material: Aluminum Spring: Zinc Plated Steel Umbrella Valve: Brass Size: 13/16” or 15/16” to be used for HB11A-60 & HB11A-45	HBSP01-P Nozzle Spout with Plastic Umbrella Valve Pipe Material: Aluminum Spring: Zinc Plated Steel Umbrella Valve: Plastic Size: 13/16” or 15/16” to be used for HB11A-60 & HB11A-45

Replacement Parts of the HB11A Series of Fuel Nozzles are Available for Easy Maintenance

Key Part Name Description 1. Spout Available in: 13/16" and 15/16" sizes   2. Full Hand Insulator: Comfortable grip cover 3. Lever Assembly: Main handle for operation 4. Lever Guard: Protects the lever and the vehicle surface 5. Diaphragm Assembly: Controls internal pressure 6. Main Valve Assembly: Core valve for fuel flow control Compatible with models HB11A-60 and HB11A-45 Easy to replace Saves time and cost

All the key parts shown in the diagram of this fuel nozzle can be sold separately. This allows for quick and cost-effective maintenance without replacing the entire nozzle.

HBUNH-3/4 Nozzle Hook Material: Forged Aluminum Size: To be used for the nozzle Spout diameter of 13/16” or 15/16” Usage: Hang your fuel nozzle for safe and clean storage.	HBGR-01 Nozzle Guard Material: Plastic   Size:to be used for HB7H-120, HB11A-60 & HB11A-45 Series of Automatic Nozzles
HBUNH-3/4 Nozzle Hook Material: Forged Aluminum Size: To be used for the nozzle Spout diameter of 13/16” or 15/16” Usage: Hang your fuel nozzle for safe and clean storage.	HBDA-01 Diaphragm Material: Fabric-reinforced Rubber Size: to be used for HB11A-60 & HB11A-45 Automatic Nozzle

This Series of Automatic DEF nozzles is designed for professional fluid dispensing in gas stations, transportation fleets, agriculture, aviation, oil, and chemical industries.
It’s compatible with 3/4" hoses and NPT or BSPP swivels, offering reliable performance and ease of use in both commercial and industrial environments.

Ordering Specifications:

Key Features:
Premium Stainless Steel Construction
Crafted from heavy-duty SS304 stainless steel, this nozzle is built for long-lasting durability.
It features Viton seals, providing excellent resistance to harsh chemicals and wear — ensuring reliability and superior performance in demanding conditions.

Versatile Fluid Compatibility
Suitable for dispensing a variety of fluids, including DEF/AdBlue, E85, Urea, and other water-based solutions.
It’s an essential tool for commercial and industrial DEF applications.
Note: This nozzle is not suitable for fueling gasoline or diesel.

Auto Shut-Off for Safety & Convenience
The automatic shut-off system stops the flow of fluid once the tank is full, preventing overfilling and spillage.
This ensures a cleaner, safer, and more efficient dispensing process every time.

Hands-Free Operation with 3-Notch Hold-Open Clip

Equipped with a 3-notch hold-open clip, the nozzle allows hands-free operation while filling the tank.
This feature reduces operator fatigue and improves work efficiency.

A 360° rotating connector and built-in stainless steel swivel ensure easy handling and reduce hose twisting and wear.

Spout sizes of HB11A-60-SS for reference

Real Photos for the DEF Nozzle (3/4” Reusable Hose Swivel or 3/4” Hose Tail Swivel is for Option)

Ordering Specifications:

Drawings and Applications:

HB36S9 Series of Hose Swivel for Fuel Nozzle (Key Words: Fuel-Dispenser-Parts, Hose-Swivel ...)

Specifications:

More Images:

HAIBO dispensing solutions offer the convenience of choice, backed by a tradition of quality, reliability, and performance. For retailers large or small, HAIBO has the right hardware solution to meet your needs. HAIBAO fuel dispenser spare parts are found in more locations in China than any other brand. When you choose any of our wide selection of dispensing products, you can rest assured that your fueling experience will be the safest, most efficient, reliable, and environmentally sustainable it can be, every time.

HBDJF Series of Angle Check Valves(OPW Type)

HBDJF Series of Angle Check Valves are installed on the suction system, fuel lines on top of fuel storage tank. Models are available with Female threaded inlets for connection directly into tank bung fittings. Single-poppet models can be used in applications where the valve is easily accessible for maintenance, disc cleaning, or replacement. The HBDJF features a spring-loaded poppet and Buna-N discs to assist in keeping the valve closed when installed in high-vibration areas. It is recommended for use on suction lines where the pressure does not exceed 34 ft of head (approximately 15 psi). Quality is 100% Factory Tested.

Specifications:

Materials:
Body: Cast Iron
Surface plated with electrophoresis
Valve: Brass
Valve seat: Brass
Valve cap: Brass
Spring: Stainless steel
Seals: Buna-N
Color: Black

Other Similar Products: For more information or custom requirements, please contact our technical support team or sales representative.

The HBHHF-40 Series Angle Check Valves are specifically engineered for installation on suction systems and fuel lines located at the top of fuel storage tanks. Each model features a 2-inch male thread inlet (integrated with a 1.5-inch female thread) for direct connection to tank bung fittings.
These valves utilize a spring-loaded poppet design and are equipped with Buna-N sealing discs, ensuring secure closure even in high-vibration environments. The single-poppet structure makes them ideal for systems where periodic maintenance, disc inspection, or replacement is required.
Recommended for use on suction lines where system pressure does not exceed 34 feet of head (approx. 15 psi). Each valve undergoes 100% factory testing to guarantee quality and performance.

Ordering Specifications:

Materials:
Body Material: Cast Iron with electrophoresis coating
Valve Cap: Cast Iron with electrophoresis coating
Spring: Stainless Steel
Seal Material: Buna-N or Viton for option

Key Features:
Dual-threaded inlet: 2” Male + 1.5” Female
Spring-loaded poppet for reliable closure
Durable Buna-N disc seals
Excellent vibration resistance
Easy maintenance and service accessibility
Black electrophoresis coating for enhanced corrosion resistance

Other Similar Products:

HBC806C-100  (Aluminum Type)

This product is installed on the bottom side of the tank truck. It is one of the main accessories of the tank truck and is used to quickly unload and upload petroleum products such as diesel, gasoline, etc.  The front-end interface complies with the American API Rp1004 standard and is convenient for connecting to the API drop adaptor（the hose connector).  The internal structure of the fluid mechanics design can reduce the internal pressure to a minimum level when the flow rate is large.  The outlet adopts a flat bottom structure, and there is no leakage when the API drop adaptor is disassembled, making it safe and reliable.

Functions & Features:
Split design allows the valve seal to be replaced without removing the valve body.
The valve body is hard-anodized, providing excellent wear resistance when connected to couplings.
Interface dimensions comply with API RP1004 standards, ensuring compatibility with standard API couplings.
An optional air interlock valve can be installed to enable interlock control during connection.

More Images:

This product is installed on the bottom side of the tank truck. It is one of the main accessories of the tank truck and is used to quickly unload and upload petroleum products such as diesel, gasoline, etc.  The front-end interface complies with the American API Rp1004 standard and is convenient for connecting to the API drop adaptor（the hose connector).  The internal structure of the fluid mechanics design can reduce the internal pressure to a minimum level when the flow rate is large.  The outlet adopts a flat bottom structure, and there is no leakage when the API drop adaptor is disassembled, making it safe and reliable.  

Functions & Features:
Split design allows the valve seal to be replaced without removing the valve body.
The valve body is hard-anodized, providing excellent wear resistance when connected to couplings.
Interface dimensions comply with API RP1004 standards, ensuring compatibility with standard API couplings.
An optional air interlock valve can be installed to enable interlock control during connection.

More Images:

Features
Compliant with EN 13308 – Service equipment for tanks.
Pneumatic control – Ensures reliable operation for loading and unloading processes.
Optimized internal design – Minimizes leakage during loading and allows high flow capacity.
Durable construction – Made of anodized aluminum for corrosion resistance.
VITON or Buna-N sealing gaskets for option– Excellent chemical resistance and durability.
1/8” GAS air inlet – Standard connection for pneumatic control.

Features
Compliant with EN 13308 – Service equipment for tanks.
Pneumatic control – Ensures reliable operation for loading and unloading processes.
Optimized internal design – Minimizes leakage during loading and allows high flow capacity.
Durable construction – Made of anodized aluminum for corrosion resistance.
VITON or Buna-N sealing gaskets for option– Excellent chemical resistance and durability.
1/8” GAS air inlet – Standard connection for pneumatic control.

Manhole covers are installed on the top of tank trucks, serving as key components for loading, unloading, and ventilation. They are equipped with a vacuum pressure vent valve and an emergency relief valve to ensure the safety of the tank in emergency situations. Under normal conditions, the vacuum pressure vent valve remains closed. However, during fuel loading, unloading, or when temperature fluctuations occur, the pressure inside the tank changes. At this time, the vacuum pressure vent valve will automatically open to release or intake air, maintaining the tank's pressure within the specified range. In the event of an emergency, such as a fire, the emergency relief valve will automatically open to quickly release the internal pressure, preventing explosions and other hazards. Our products meet international standards and have been widely recognized by oil companies around the world as essential safety devices for the transportation of hazardous materials.

Warning:
For the safety of your tank, do not use the vacuum pressure vent valve as a regular vent valve during loading and unloading operations.

Features:
Galvanized steel: Used for the handle, cover plate, and clamp ring, offering durability and strength.
Low-pressure die-cast aluminum alloy: Used for the emergency relief valve cover, providing high strength and corrosion resistance.
Sealing rings: Available in nitrile rubber (NBR) or fluororubber (FKM) to meet different sealing requirements.
Low-carbon steel: The manhole neck ring is made of high-quality low-carbon steel, ensuring excellent welding performance.

Mounting method: Features a clamp-tight design for quick installation and removal. Comes with a pre-installed manhole neck, simplifying the installation process.
Emergency relief valve: Equipped with a spring-loaded emergency relief valve that automatically opens, complying with international tank truck transport standards (NTTC DOT406), effectively preventing tank explosions.
Leakage prevention: In the event of a rollover, the automatic sealing function of the pressure-vacuum relief valve effectively prevents hazardous fuel leakage, ensuring safety.
Dual-stage safety design: Comes with a safety lock that enables a dual-stage safety opening, ensuring additional safety measures before the emergency relief valve fully opens.
Convenient design: The 250mm (10-inch) emergency relief valve port facilitates the easy insertion of the oil inlet pipe during top loading, enhancing operational convenience.

RKG-460TC Series of Clamped Type Carbon Steel Manhole Covers

Ordering Specifications: Big Cover Thickness is 4.5 mm, Neck Ring Wall Thickness is 2.5 mm.

 Probe Hole Diameter is 60.3 mm, Vent Hole Diameter is 97.5 mm for RKG-460T Series of Manholes.

RKG-460TB Series of  Bolted Type Carbon Steel Manhole Covers

Ordering Specifications: Big Cover Thickness is 4.5 mm.

Probe Hole Diameter is 60.3 mm, Vent Hole Diameter is 97.5 mm for RKG-460T Series of Manholes.

RKG-560TC Series of Clamped Type Carbon Steel Manhole Covers

Ordering Specifications:Big Cover Thickness is 5 mm. Neck Ring Wall Thickness is 2.5 mm.

Our regular Probe Hole Diameter D1 is 60.3 mm, Vent Hole Diameter D2 is 104 mm. We can also make these hole sizes according to your detailed requirements. The Cover & Neck Ring Thickness can be customized.

RKG-560TB Series of Bolted Type Carbon Steel Manhole Covers

Ordering Specifications:Big Cover Thickness is 5 mm.

Our regular Probe Hole Diameter D1 is 60.3 mm. We can also make these hole sizes according to your detailed requirements. The Cover & Neck Ring Thickness can be Customized.

Manhole covers are installed on the top of tank trucks, serving as key components for loading, unloading, and ventilation. They are equipped with a vacuum pressure vent valve and an emergency relief valve to ensure the safety of the tank in emergency situations. Under normal conditions, the vacuum pressure vent valve remains closed. However, during fuel loading, unloading, or when temperature fluctuations occur, the pressure inside the tank changes. At this time, the vacuum pressure vent valve will automatically open to release or intake air, maintaining the tank's pressure within the specified range. In the event of an emergency, such as a fire, the emergency relief valve will automatically open to quickly release the internal pressure, preventing explosions and other hazards. Our products meet international standards and have been widely recognized by oil companies around the world as essential safety devices for the transportation of hazardous materials.

RKG-L-B460 Cast Aluminum Manhole Cover (Bolted Type)

Features:
1. Big plate & small plate are cast, oxidation treatment onthe surface
2. Can install double vent valves according to requirements
3. Compact dimensions, relatively low manufacturing cost
4. A big plate has two holes; it can be installed with an optic sensor.dip tube or external vacuum valve.

RKG-L-B560 Cast Aluminum Manhole Cover (Bolted Type)

Features:
1. Big plate & small plate are die-casting aluminum, with oxidation treatment on the surface
2. Can be installed with 2 pieces of vent valves according to requirements
3. A big plate has two holes; it can be installed with an optic sensor.dip tube or external vacuum valve

RKG-L-B580 Cast Aluminum Manhole Cover (Bolted Type)

Cast Aluminum Petroleum Manhole Cover Ordering Specifications:

These vacuum pressure vent valves are used in gas stations or oil storage depots. The vent valve typically consists of two parts: a pressure valve and a vacuum valve designed to be installed inside. It is usually installed at a height of approximately 4.5 meters on the vent pipe of the oil storage tank to maintain the tank's tightness under normal circumstances.They protect tanks from excessive over- or under-pressure. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent.

HY628V-50 Vacuum Pressure Vent Valve

Technique Specification： Top/Body: Polypropylene Base: Anodized aluminum Poppet: Anodized aluminum Screen: Stainless steel mesh Gasket: Closed-cell foam Temperature Range:-20~+50℃ Positive:+3 inches of water column for the international market  + 9 inches of water column for the domestic market Negative: -8 inches of water column

Order Specifications:

Standard of connecting flange can be produced according to the client’s detailed requirement.

Important Note: These vents should not be used on under-ground storage tank (UST) with a throughput of 100000 gallon or more per month.

Features:
It reduces oil evaporation losses to a certain extent. When necessary, it can automatically open and adjust to maintain a balanced pressure inside and outside the tank, serving a safety function for the tank.
When the vapor pressure in the tank exceeds the allowable pressure, oil vapor is released through the pressure valve, while the vacuum valve remains closed.
When the vapor pressure in the tank is lower than the allowable vacuum, fresh air enters into the tank through the vacuum valve while the pressure valve stays closed.
The international standard for the positive pressure opening is +3 inches of water column (+750Pa), and the activation negative pressure is -8 inches of water column (-2000Pa). For the Chinese domestic market standard, the positive pressure opening is +9 inches of water column (+3000Pa), and the activation negative pressure is -8 inches of water column (-2000Pa).

Installation Instructions:
Before installing the PV vent, it is recommended to cycle the poppet up and down. This ensures free operation of the poppet if the valve has had an extended shelf life.
An inlet screen is now included with the Vacuum Pressure Vent Valve to avoid ingestion of particles from the riser pipe that could cause the valve poppet not to seal properly.

HY628V-XXFA Series of Vacuum Pressure Vent Valves With Additional Flame Arrestor ( OPW Type)
These vacuum pressure vent valves are used in gas stations or oil storage depots. The vent valve typically consists of two parts: a pressure valve and a vacuum valve designed to be installed inside. It is usually installed at a height of approximately 4.5 meters on the vent pipe of the oil storage tank to maintain the tank's tightness under normal circumstances. They protect tanks from excessive over- or under-pressure. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris, or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent.

HY628V-50FA Vacuum Pressure Vent Valve With Flame Arrestor

Technique Specification： Top/Body: Polypropylene Base: Anodized aluminum Poppet: Anodized aluminum Screen: Stainless steel mesh Gasket: Closed-cell foam Temperature Range:-20~+50℃ Positive:+3 inches of water column for the international market, + 9 inches of water column for the domestic market Negative: -8 inches of water column Flame Arrestor Body: Cast Aluminum (Flange Connection) Inner Arrestor Material: Foldable Aluminum Alloy

Order Specifications:

Standard of connecting flange can be produced according to the client’s detailed requirement.

Important Note: These vents should not be used on an underground storage tank (UST) with a throughput  of 100000 gallons or more per month.

Features:
It reduces oil evaporation losses to a certain extent. When necessary, it can automatically open and adjust to maintain a balanced pressure inside and outside the tank, serving a safety function for the tank.
When the vapor pressure in the tank exceeds the allowable pressure, oil vapor is released through the pressure valve, while the vacuum valve remains closed.
When the vapor pressure in the tank is lower than the allowable vacuum, fresh air enters the tank through the vacuum valve while the pressure valve stays closed.
The international standard for the positive pressure opening is +3 inches of water column (+750Pa), and the activation negative pressure is -8 inches of water column (-2000Pa). For the Chinese domestic market standard, the positive pressure opening is +9 inches of water column (+3000Pa), and the activation negative pressure is -8 inches of water column (-2000Pa).

Installation Instructions:
Before installing the PV vent, it is recommended to cycle the poppet up and down. This insures free operation of the poppet if the valve has had an extended shelf life.An inlet screen is now included with the Vacuum Pressure Vent Valve to avoid ingestion of particles from the riser pipe that could cause the valve poppet not to seal properly.

These vacuum pressure vent valves are used in gas stations or oil storage depots. The vent valve typically consists of two parts: a pressure valve and a vacuum valve designed to be installed inside. It is usually installed at a height of approximately 4.5 meters on the vent pipe of the oil storage tank to maintain the tank's tightness under normal circumstances. They protect tanks from excessive over- or under-pressure. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris, or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent.

HBVV-50 Vacuum Pressure Vent Valve

Technique Specification： Body: Aluminum Poppet: Acetal Screen: Brass mesh Spring: Stainless steel Screws: Zinc-plated steel Temperature Range:-20~+50℃ Positive:+3 inches of water column for the international market, + 9 inches of water column for the domestic market Negative: -8 inches of water column

Order Specifications:

Standard of connecting flange can be produced according to the client’s detailed requirement

Important Note: These vents should not be used on an underground storage tank (UST) with a throughput of 100,000 gallons or more per month.

Features:
It reduces oil evaporation losses to a certain extent. When necessary, it can automatically open and adjust to maintain a balanced pressure inside and outside the tank, serving a safety function for the tank.
When the vapor pressure in the tank exceeds the allowable pressure, oil vapor is released through the pressure valve, while the vacuum valve remains closed.
When the vapor pressure in the tank is lower than the allowable vacuum, fresh air enters the tank through the vacuum valve while the pressure valve stays closed.
The international standard for the positive pressure opening is +3 inches of water column (+750Pa), and the activation negative pressure is -8 inches of water column (-2000Pa). For the Chinese domestic market standard, the positive pressure opening is +9 inches of water column (+3000Pa), and the activation negative pressure is -8 inches of water column (-2000Pa).

Installation Instructions:
Before installing the PV vent, it is recommended to cycle the poppet up and down. This ensures free operation of the poppet if the valve has had an extended shelf life.
An inlet screen is now included with the Vacuum Pressure Vent Valve to avoid ingestion of particles from the riser pipe that could cause the valve poppet not to seal properly.

HY61SO-100	Single Valve Body	HY61SO-100 Series of Overfill Prevention Valves are self-contained two-stage positive shut-off valves designed to prevent the overfill of an underground storage tank (UST) during a gravity-fed product delivery. When the liquid level of the UST reaches about 92% of the tank capacity during a fill, the product in the tank raises the lower float of the valve. The primary poppet of the valve is then released and reduces flow to about10% of normal flow. The sudden reduction in flow created by the closing of the primary poppet provides line shock to the fill hose, notifying the transport delivery driver that the tank is nearing 95% capacity. The transport delivery driver can then stop filling the tank, disconnect, and drain the delivery hose. The upper float will close off the product flow when the product level reaches 95% of the tank capacity.
		Features: Two-stage, spring-loaded shut-off flapper reduces line shock. Vertical float design allows for the valve to be removed even when the tank is full. Inspection test port. Bottom tube threads on

Ordering Specifications:

Note: The above item is our regular item, which we usually have in stock. The length of the Upper Tube and Lower Tube can be produced according to the user’s detailed requirements. The valve body, excluding the upper and lower pipes, can also be sold separately.

	Note: Above item is our regular item which we usually have it in stock. The length of Upper Tube and Lower Tube can be produced to according to user’s detailed requirement. The valve body, excluding the upper and lower pipes, can also be sold separately.
	WARNING: Failure to properly connect delivery hose and elbow, and/or disconnecting a liquid filled delivery hose or elbow will result in a hazardous spill, which may result in personal injury, property damage, fire, explosion, and water and soil pollution.

Spill Containers are designed to prevent spilled product from entering the soil near the fill and vapor return riser connections on underground storage tanks during normal tank filling operation, or in the event of tank overfill. The spill containers catch spillage to help prevent soil contamination and groundwater pollution. They provide an economical solution for the collection of spilled product during normal tank filling of underground storage tanks. They are available in both 20 Liters and 40 Liters capacities, to meet the needs of your application and preference. It provides a basic, easy-to-install, and simple-to-maintain spill containment solution.

20 Liters Capacity

Cover Diameter

Materials: Cover: Cast iron Mounting ring: Cast iron Bellows: Polyethylene Base: Cast iron Seals: Buna-N

Ordering Specifications:

Note: The net weight of HBEBSC-20 is about 40 Kgs and the new weight of HBEBSC-40 is about 50 Kgs.
We can also make the 4” aluminum cam-lock male or female coupler to be 3” or 2.5” according to detailed needs.

Features:
The durable and flexible polyethylene shell is designed to move with natural ground movements. Cast iron base design is the most reliable in the industry.The polyethylene shell is bolted between the cast iron base and cast iron mounting ring, it is a very durable design. The base can be easily threaded onto a 4" tank riser pipe. Above the bottom base, you can connect a short section of 4-inch steel pipe (our regular type) or a 4-inch ball valve with male threads. The threaded end of the 4-inch steel pipe can be connected to a Top-Seal Adaptor with a Top-Seal Adaptor. The 4-inch ball valve can be equipped with a 4-inch male end com-lock coupling or can be converted to a 3-inch male end com-lock coupling, providing more flexibility in connection options.Heavy duty cast iron mounting ring and cast iron cover provide protection from heavy traffic and truck plows.Especially designed drain valve allows emptying of contained product back to the storage tank.

The Item No. Explanation for inner installed spare parts：

HBEBSC-20	HBEBSC-20-AC	HBEBSC-20-AC	HBEBSC-20-C	HBEBSC-20-V

This product designed to be used in the above Spill Container, the male side can be connected with C type quick couplings, it features an aluminum alloy housing and a stainless steel ball core, offering advantages such as a compact structure, light weight, small size, and convenient use. It is equipped with a limited lever and locking devices for safety and reliability. The ball valve is widely used for opening and closing control in non-corrosive liquid transportation pipelines. The one-way ball valve is primarily used in oil depots, gas stations, oil tank trucks, and other applications.

Ordering Specifications:

HBEBSC-P Carbon Steel Connection Pipe for Spill Container

Ordering Specifications:

HBTFTA-100B Series of Aluminum Tight-Fill Top-Seal Adaptors

Top-Seal Adaptor threads onto the fill pipe of underground storage tanks, and are designed to mate with top-seal delivery elbows. It usually to be used together with a Top-Seal Cap and installed in spill containment manholes on the fill riser pipe from an underground fuel storage tank. They mate with the gravity drop delivery elbow on the transport truck.

Ordering Specifications:

Features:
Easy installation: integral internal wrenching lugs are provided for installation in the confined space of spill containers.
Manufactured from Durable, Corrosion-Resistant Materials: Heat Treated Aluminum with oil-resistant rubber gasket. Seamlessly compatible with the HBSYWG-100 Series of Gravity Drop Top-seal Delivery Elbows.

HBVRBV Series Vapor Recovery Adaptor with Built-on Ball Valves are made in material of cast aluminum.
Based on feedback from many gas station or oil depot field workers, we developed this series of products. When workers connect the vapor recovery hose coupling to a normal vapor recovery adapter without a ball valve, the oil vapor will instantly spray out as the vapor inside the tank often maintains some pressure. This can lead to a series of safety issues and the emitted vapor has an unpleasant odor.

HBVRBV-80F and HBVRBV-100F of

Technique Specification： Ball Valve: Aluminum Gasket for ball valve: Teflon Vapor Recovery Adaptor: Aluminum Gasket for vapor recovery adaptor: Buna-N and Viton Male end of vapor recovery adaptor:4 inch Flange Size: DN65 to DN150 (2.5 to 6 inch) Temperature Range:-20~+50℃ Standard of male end of vapor recovery adaptor and standard of ball valve connecting flange can be produced according to the client’s detailed requirement.

Ordering Specifications:

The standard of the male end of the above vapor recovery adaptor and the standard of ball valve connecting flange can be produced according to client’s detailed requirement.

The features of the above product are as follows:
Operators can first connect the vapor recovery hose coupling to the vapor recovery adapter and then open the ball valve by turning the handle. This allows all the oil vapor that needs to be displaced from the tank to be recovered through the vapor recovery hose. This product effectively solves the problem of oil vapor leakage, preventing any unpleasant experiences for the users. After years of market selection, this series of products has become very popular among our end users.